How to pair Plantronics headset to base

The following steps detail how to pair a new Plantronics wireless headset to a base / charger.

  1. Remove the original headset from the base/charging cradle
  2. PlantronicaPair1
  3. On the back of the base unit, press and hold the microphone (talk) volume + button until the red power indicator light on the front of the base starts to blink. (Approximately 5 seconds). Now release the button.
  4. PlantronicaPair2
  5. Place the new headset into the charging cradle. The red Indicator Light will flash for 2 seconds.
  6. PlantronicaPair3
  7. Now, press the + or – Volume Button on the headset for 3 seconds until the Headset Talk Light comes on.

Please Note: After pairing the new headset try to leave it on the charger for at least 30 minutes to allow it to have enough charge for a phone call.

Was this article helpful?

Related Articles